Product ID:EZ-X A/O EXTRA
MSDS Date:12/24/1985
FSC:5610
NIIN:00F009718
MSDS Number: BHLMB

STANDARD ABRASIVES, INC

19015 PARTHENIA STREET
NORTHRIDGE, CA 91324

Emergency Phone: (818) 349-5650

Info Phone: (818) 349-5650

Cage: 26082

STANDARD ABRASIVES, INC

NORTHRIDGE, CA 91324

Telephone: (818) 349-5650

Cage: 26082

ALUMINUM SODIUM FLUORIDE (SODIUM FLUOALUMINATE OR CRYOLITE)

CAS: 15096-52-3

RTECS: WA9625000

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

DECHLORANE 605, CHLORINATED ALICYCLIC

CAS: 13560-89-9

RTECS: IO1430000

ACGIH TLV: 2.5 MG/CUM

ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: COUGHING, SHORTNESS OF
BREATH. SKIN: ABRASIONS. EYES: IRRITATION. INGESTION: NO KNOWN
ADVERSE EFFECTS, BUT INGSTION NOT RECOMMENDED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: EFFECT BREATHING CAPACITY. SKIN:
ABRASIONS. EYES: IRRITATION. USE ON SOME MATERIALS ELEVATED SOUND
LEVELS MAY BE CREATED WHICH EFFECT HEARING.

First Aid:INHALATION: REMOVE TO FRESH AIR & APPLY ARTIFICAL RESPIRATION
AS NEEDED. OBTAIN FIRST AID/MED ATTN. INGESTION/SKIN: OBTAIN MED
ATTN. EYES: WASH W/LARGE AMOUNTS OF WATER. OBTAIN MED ATTN.

Fire Fighting Procedures:USE RESPIRATORY PROTECTION.

Spill Release Procedures:NORMAL CLEAN UP PROCEDURES.

Handling and Storage Precautions:HANDLE W/ADEQUATE VENTILATION.
MEASURES TO BE TAKEN DURING REPAIR/MAINTENANCE OF CONTAMINATED
EQUIPMENT THAT HAS BEEN IN CONTACT W/THIS MATERIAL.

Respiratory Protection:AS NEEDED, APPROVED DUST RESPIRATOR.
Ventilation:LOCAL EXHAUST/MECHANICAL: RECOMMENDED
Protective Gloves:AS DESIRED BY USER
Eye Protection:RECOMMENDED
Other Protective Equipment:AS NEEDED, HEARING PROTECTION.
Supplemental Safety and Health
IN USE DUST/DECOMPOSING RESIN SYSTEM FUMES ARE GENERATED. IN MOST
CASES, THE MATERIAL REMOVED FROM THE WORK PLACE WILL BE
SIGNIFICANTLY GREATER THAN THE COATED ABRASIVE PRODUCT COMPONENTS.

Appearance and Odor:CLOTH OR FIBRE. COATED W/ABRASIVE MATERIAL

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME
Hazardous Decomposition Products:TOXIC CHLORINE, CHLOROCARBONS, &
HYDROGEN CHLORIDE, DUST & DECOMPOSING RESIN SYSTEM FUMES

Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTANT
W/APPLICABLE FEDERAL, STATE & LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.